KYORITSU 1061/1062

  KEW 1061 KEW 1062 Detection mode RMS MEAN/RMS (switch) DC V 50.000/500.00/2400.0mV/5.0000/50.000/500.00/1000.0V
(Input impedance: Approx. 100MΩ [50/500/2400mV], 10MΩ [5/50/500/1000V])

|±0.02%rdg±2dgt (Basic accuracy) AC V
[RMS] 50.000*/500.00mV/5.0000/50.000/500.00/1000.0V(* Only for 1062)
(Input impedance: 11MΩ<50pF [50/500mV/5V], 10MΩ<50pF [50/500/1000V]) |±0.7%rdg±30dgt (Basic accuracy) |±0.4%rdg±30dgt (Basic accuracy) AC V
[MEAN] * -- 50.000/500.00mV/ 5.0000/50.000/500.00/1000.0V
(Input impedance:
11MΩ<50pF [50/500mV/5V],
10MΩ<50pF [50/500/1000V])

|±1%rdg±30dgt (Basic accuracy) DCV+ACV 5.0000/50.000/500.00/1000.0V
(Input impedance: 11MΩ<50pF [5V], 10MΩ<50pF [50/500/1000V]) |±1%rdg±10dgt (Basic accuracy) |±0.5%rdg±10dgt (Basic accuracy) DC A 500.00/5000.0µA/50.000/500.00mA/5.0000/10.000A

|±0.2%rdg±5dgt (Basic accuracy) AC A
[RMS] 500.00/5000.0µA/50.000/500.00mA/5.0000/10.000A |±1%rdg±20dgt (Basic accuracy) |±0.75%rdg±20dgt
|(Basic accuracy) AC A
[MEAN] * -- 500.00/5000.0µA/50.000/500.00mA/ 5.0000/10.000A

|±1.5%rdg±20dgt (Basic accuracy) DCA+ACA 500.00/5000.0µA/50.000/500.00mA/5.0000/10.000A |±1.5%rdg±10dgt (Basic accuracy) |±1%rdg±10dgt (Basic accuracy) Ω 500.00Ω/5.0000/50.000/500.00kΩ/5.0000/50.000MΩ |±0.1%rdg±2dgt (Basic accuracy) |±0.05%rdg±2dgt (Basic accuracy) LowPower-Ω * -- 5.000/50.00/500.0kΩ/5.000MΩ

|±0.2%rdg±3dgt (Basic accuracy) Continuity buzzer 500.0Ω (The buzzer turns on for resistances lower than 100±50Ω) Diode test 2.4000V|±1%rdg±2dgt
Open curcuit voltage: <5V (Approx. 0.5mA Measuring Current) Capacitance 5.000/50.00/500.0nF/5.000/50.00/500.0µF/5.000/50.00mF

|±1%rdg±5dgt (Basic accuracy) Frequency 2.000 - 9.999/9.00 - 99.99/90.0 - 999.9Hz/0.900 - 9.999/9.00 - 99.99kHz

|±0.02%rdg±1dgt (Basic accuracy) DUTY 10 - 90%|±1%rdg Temperature -200 - 1372ºC|±1%rdg±1.5ºC
-328 - 2501.6ºF|±1%rdg±2.0ºF
(with the use of K-type Temperature probe) Measurement
functions DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature, Capacitor, Duty cycle ratio, Decibel (dBV, dBm), Continuity Check, Diode Test, LowPower-Ω * Other functions Data Hold (D/H), Auto Hold (A/H), Peak Hold * (P/H), Range Hold (R/H), Maximum value (MAX), Minimum value (MIN), Average value (AVG), Zero Adjustment (Capacitor, Resistance), Relative values, Save to Memory, LCD backlight Withstand voltage 6,880V/5 sec. Applicable
standards IEC 61010-1 CAT IV 600V, CAT III 1000V Pollution degree 2,
IEC 61010-031, IEC 61326-1 (EMC) Power source R6 (1.5V)×4 (Auto power off: approx. 20 minutes) Dimensions 192(L)×90(W)×49(D) mm Weight Approx. 560g (including batteries) Accessories 7220A (Test leads), R6×4, Instruction manual,
8926 (Fuse [440mA/1000V])×1 (included)
8927 (Fuse [10A/1000V])×1 (included)