KYORITSU 1011/1012

DC V 600.0mV/6.000/60.00/600.0/600V
(Input Impedance: 10MΩ, 100MΩ only 600mV)
|±0.5%±2dgt (600.0mV/6.000/60.00/600.0V)
|±0.8%±3dgt (600V) AC V 6.000/60.00/600.0/600V
(Input Impedance: 10MΩ)
|±1.0%±3dgt (6.000/60.00/600.0V)
|±1.5%±3dgt (600V) DC A 600/6000µA/60/600mA/6/10A
|±1.2%±3dgt (600/6000µA/60/600mA)
|±2.0%±5dgt (6/10A) AC A 600/6000µA/60/600mA/6/10A
|±1.5%±4dgt (600/6000µA/60/600mA)
|±2.2%±5dgt (6/10A) Ω 600Ω/6/60/600kΩ/6/60MΩ
|±1.0%±2dgt (600Ω/6/60/600kΩ/6MΩ)
|±2.0%±3dgt (60MΩ) Continuity buzzer 0 - 600Ω (Buzzer sounds below 100Ω) Diode Check 2.8V Release Voltage:Approx. 0.4mA Test Current Capacitance 40/400nF/4/40/400/4000µF Frequency 10/100/1000Hz/10/100/1000kHz/10MHz DUTY 0.1 - 99.9% (Pulse width/Pulse period)
|±2.0%±2dgt (- 10kHz) Temperature -50 - 300ºC (-58 - 572ºF)
(with the use of Temperature probe 8216) Note: KEW 1011 can measure max. 700ºC
In order to measure over 300ºC, please use a K-type temperature probe available in the market. Display 6040 Counts Withstand Voltage AC 3700V / 1min. Applicable standards IEC 61010-1 CAT III 300V Pollution degree 2
IEC 61010-1 CAT II 600V Pollution degree 2
IEC 61010-031
IEC 61326 Power Source R6 (1.5V) × 2 (Auto-power-OFF within 15 minutes) Dimensions 161(L) × 82(W) × 50(D)mm Weight Approx. 280g Accessories 7066A (Test leads)
8216 (K-type Temperature probe)
0.8A/600V (Ceramic Fuse) × 1built-in
10A/600V (Ceramic Fuse) × 1built-in
R6 × 2Instruction Manual Optional 7234 (Crocodile clip test lead)
9095 (Carrying case)